SG15Fx / Fy 600 N 1.0 m/sGOLDEN BEETLE / INDUSTRIAL SOLUTIONS
From guidance to protection.
Find the right fit for your motion.
Heavy-duty guidance, wear-limit monitoring and adhesive-backed UHMW-PE.
Select products around your load, travel and available mounting space.
GUIDING SYSTEMS
One rail platform.
Two guiding methods.
SG sliding guides suit compact layouts, impact loading and frequent starts and stops.
GL roller guides suit smooth motion, long travel and continuous operation.
After selecting a model, verify force directions and mounting dimensions.
Showing all 7 models
SG15Fx / Fy 600 N 1.0 m/s
SG16Fx / Fy 1000 N 1.0 m/s
SG17Fx / Fy 1500 N 1.0 m/s
SG17AFx / Fy 2000 N 1.0 m/s
SG18Fx / Fy 1000 N 1.0 m/s
GL76Fx / Fy 1500 N 1.75 m/s
GL76AFx / Fy 800 N 1.75 m/sNo matching models. Change the search term or series filter.
Values are maximum forces by model; Fx and Fy refer to the respective force directions. Verify operating conditions and mounting dimensions separately.
Compare specifications and maintenance ＋
| Selection item | Linear sliders | Roller Guide |
|---|---|---|
| Guiding method | Sliding contact with the rail | Rollers running along the rail |
| Suggested conditions | Compact, impact loading, frequent stops | Smooth motion, long travel, continuous use |
| Maximum speed | 1.0 m/s | 1.75 m/s |
| Max. force by model | 600–2000 N | 800–1500 N |
| Operating temperature | -5～80 °C | -5～50 °C |
| Compatible rails | T75 / T89 | T75 / T89 |
| Lubrication | No oil lubrication required | No oil lubrication required |
| Series | Service life data | Maintenance interval |
|---|---|---|
| SG | Liner: 24 months / Base: 5 years | 30 days |
| GL | Roller: 24 months / Base: 5 years | 30 days |
RAIL PLATFORM
T75 / T89
Connect the full travel path.
Rails shown have a 304 stainless steel working face and an A3 carbon steel base with black powder coating. Sections are up to 2 m long and can be joined with connecting plates.
Mount through holes machined in the base with bolts, or use dedicated rail clamps. Conventional rails are also available with chrome plating or a black oxide finish.
Confirm connecting hardware and mounting datums for the equipment.
T75Rail width 75 mm
Details & drawing ↗
T89Rail width 90 mm
Details & drawing ↗
M100 / WEAR LIMIT MONITORINGWEAR-LIMIT MONITORING
A signal at the wear limit.
A prompt for maintenance.
Signals when wear reaches the preset position, prompting inspection and replacement of the linear slider liner.
0.5–3 mmWear-depth alarm setting range
Confirm the setpoint, tolerance and operating conditions. Replace the sensor after activation. This is not a continuous thickness measurement device.
Discuss mounting and compatibility ↗
Monitoring system installation illustration. Verify the actual mounting position and clearance.
Choose a sensor or a monitoring system.
The sensor alone requires a controller and alarm. The optional monitoring system supports local visual and audible alarms and a Y0 output; interface logic requires integration testing.
| Sensor only | Specification |
|---|---|
| Supply | DC 2.5–24 V |
| Output | NMOS open-drain, active low; external pull-up required |
| Dimensions & mounting | M12 × 40 mm M12 thread; 40 mm length |
| Alarm setting | Liner wear depth: 0.5–3 mm; custom settings available |
| After activation | One-shot activation; replace sensor and verify the alarm |
Optional control board: DC 24 V ±10%, three wear inputs and an optional oil-cup level input. Control board functions do not apply to the sensor alone.
ADHESIVE-BACKED UHMW-PE
Give contact surfaces
a layer of wear protection.
Ultra-high-molecular-weight polyethylene for wear liners, sliding interfaces and surface protection.
Four thicknesses, with standard or high-bond adhesive.
Trial on the actual substrate and validate under the intended load, speed and environmental conditions.
Rolls 0.2 / 0.5 / 1.0 mm
Sheets 2.0 mm| UPE thickness (mm) | Total with adhesive, excluding release liner (mm) | Maximum supply size |
|---|---|---|
| 0.2 | 0.25 | 100 mm × 50 m / roll |
| 0.5 | 0.55 | 100 mm × 50 m / roll |
| 1.0 | 1.05 | 100 mm × 50 m / roll |
| 2.0 | 2.05 | 1.0 × 2.0 m / sheet |
Total thickness with adhesive excludes the release liner. Cut-to-size supply is available; confirm dimensions and cutting tolerances separately. Adhesive peel strength and operating temperature remain subject to final confirmation.
SUGGESTED APPLICATIONS
Start with your operating conditions.
Special-purpose machinery & automation
Mounting space and orientation · Force direction · Interfaces
↗These are suggested applications. Confirm models, rails and mounting drawings before ordering.
ABOUT GOLDEN BEETLE
Built around the application.
Matched to your equipment.
Golden Beetle (Wuxi) New Materials Co., Ltd. provides heavy-duty linear guiding systems, wear-limit monitoring products and adhesive-backed UHMW-PE for industrial equipment.
We consider load, speed, travel and available mounting space to define suitable models, interfaces and supply specifications, supporting equipment design and application integration.
Download the bilingual catalogue ↓
Product testing and application support · Define test items, conditions and evaluation criteria around the application.
DOWNLOADS / V18 · 2026-10-22
Download only what you need.
Bilingual PDFs · Select a chapter for a smaller download.
ENGINEERING ENQUIRY
Prepare your enquiry.
Create an email or copy the details to WeChat. This form does not submit or store your entries.
Email opens your mail app; send it there to complete your enquiry. zhuwentao@jjcnewmat.cn
LET’S TALK / ENGINEERING ENQUIRIES
Tell us about your application.
Let’s find the right solution.
Please provide the model, load and force direction, speed, travel and mounting space.
For UHMW-PE, also specify thickness, cut size, bonding substrate and operating environment.
Sales: Mr. Zhu
2F, Building 1, Qinglongshan Industrial Park, Binhu District, Wuxi, China
WeChat · Mr. Zhu